Mga Tip sa Boiler
1. The drum is connected by a riser and a downcomer to form a natural circulation loop.Upper drum is filled with water and steam mixture from circulation loop,normally there will be water steam seperating device and feeding water distribution pipe.In order to improve the quality of boiler water some boilers are also equipped with continuous sewage pipe and dosing pipe. There is a regular sewage discharge device in the lower drum. On the outer wall of the upper boiler drum of steam boiler, there are also flanged short pipes connecting the main steam pipe and the secondary steam pipe and flanges and short pipes connecting the continuous water level gauge, pressure gauge, safety valve and other accessories. There is a regular blowdown device for discharging sediment in the lower boiler drum. 2. For larger capacity boilers, simply using natural separation of steam and water can no longer meet the requirements, need to install a seperating device inside upper drum. 3. The water-cooled wall tube is usually a no.10 or no.20 seamless steel tube with an outer diameter of 51~76mm and a wall thickness of 3.5~6.0mm. The distance between the center of the tube is generally 1.25~2 times of the outer diameter of the tube.Both finned tubes and bare tubes. 4. Water - cooled walls are generally fixed on the upper, the lower can be free expansion. 5. The function of steam superheater is to heat the saturated steam drawn out of the upper drum to a certain temperature of the superheated steam. Industrial steam is mostly saturated steam, so normally general boiler are not equipped with steam superheater. A steam superheater is installed in the boiler only if the production steam requires a higher temperature and does not require an increase in steam pressure, or if superheated steam is required in order to reduce condensation losses during steam transmission. In industrial boilers, the temperature of superheated steam is 250℃ and 350℃ for the boilers with working pressure of 1.25MPa, and 350℃ for the boilers with working pressure of 1.6MPa.
